Investment Decisions on Automation of Manufacturing in the Wood Products Industry: A Case Study

Roaa Salim, Agostino Manduchi, Anders Johansson

Abstract


The wood products industry is facing increasing challenges from global competition, and automation of
manufacturing can greatly help companies in the industry to handle such challenges. Investments in automation
of manufacturing are more likely to succeed if they are the expression of informed and systematic decisions.
This paper aims to increase the knowledge on the process leading to investment decisions on automation of
manufacturing in the wood products industry, as well as on the aspects considered in such processes. A real-time
case study was conducted at a large Swedish wood manufacturing company to gain in-depth understanding
of decisions related to automation investments. The findings demonstrate that mainly representatives from
manufacturing and marketing functions were involved throughout the investment project's length. This could
be a contributing factor to the narrow view on automation of manufacturing when decisions are made, where
focus is placed on financial and technological aspects. The findings further show a limited knowledge regarding
automation of manufacturing, which resulted in a tendency to heavily rely on the technical supplier’s
recommendations. This paper identifies the weak points related to decisions on automation of manufacturing
in the wood products industry and provides insights on how to support the decision process.


Keywords


development projects, manufacturing technology, decision-making, wood products industry, empirical research

Full Text:

PDF

References


Almannai, B., Greenough, R., & Kay, J. (2008). A decision support tool based on QFD and FMEA for the selection of manufacturing automation technologies. Robotics and Computer-Integrated Manufacturing , 501-507.

Banerjee, A. V. (1992). A simple model of herd behavior. Quarterly Journal of Economics, 797-817.

Brunelli, M. (2015). Introduction to the Analytic Hierarchy Process. Springer.

CEI-BOIS. (2018). Vision 2040 of the European Forest-Based Sector.

DeLong , D., Kozak , R., & Cohen , D. (2007). Overview of the Canadian value-added wood products sector and the competitive factors that contribute to its success. Canidian Journal of Forest Research, 37(11), 2211-2226.

Eliasson, L. (2014). Some aspects on quality requirements of wood for use in the industrial manufacture of single family timber house. Växjö: Institutionen för teknik, Linnéuniversitet.

Garicano, L., & Posner, R. A. (2005). Intelligence Failures: An organizational economicsperspective. Journal of Economic Perspectives, 151-170.

Gigerenzer, G., Todd, P. M., & the ABC Resear. (1999). Simple Heuristics That Make Us Smart. Oxford University Press.

Groover, M. P. (2007). Automation, production systems, and computer-integrated manufacturing. Prentice Hall Press.

Hamilton, R. (2016). How You Decide: The Science of Human Decision Making. Retrieved from The Great Courses.

Johansson , A., Gustavsson Christiernin, L., & Pejryd, L. (2016). Manufacturing system design for business value, a holistic design approach. CIRP (pp. 659 – 664). Elsevier.

Kahneman, D. (2011). Thinking, Fast and Slow. . Farrar, Straus and Giroux.

Karlsson, C. (2009). Researching Operations Management. New York: Routledge.

Karltun, J. (2007). On stage: Acting ffor development of businesses and ergonomics in woodworking SMEs. Linköping: Linköpingsuniversitet.

Kumar, R., Singh, H., & Chandel, R. (2017). Exploring the key success factors of advanced manufacturing technology. Journal of Manufacturing Technology Management, 29(1), 25-40.

Lehto, M. R. (2001). Decision-Making Models. In Handbook of Industrial Engineering: Technology and Operations Management, Third Edition. John Wiley & Sons.

Lehto, M. R., Fui‐Hoon Nah, F., & Yi, J. S. (2012). Decision-Making Models, Decision Support, and Problem Solving. In G. Salvendy, Handbook of Human Factors and Ergonomics. John Wiley & Sons.

Machuca, J. A., Jiménez, C. H., Garrido-Vega, P., & de los Ríos, J. L. (2011). Do technology and manufacturing strategy links enhance operational performance? Empirical research in the auto supplier sector. International Journal of Production Economics, 133(2), 541-550.

Nord, T., & Widmark, N. (2010). Trämanufaktur i ett uthålligt samhällsbyggande - Åtgärder för ett samverkande innovationssystem. VINNOVA - Verket för Innovationssystem.

NRA Sweden. (2012). En nationell strategisk foskrningsagenda för den skogsbaserade näringen i Sverige. Gävle: NRA Sweden The Swedish National Support Group.

Ortega, C. H., Garrido-Vega, P., & Machuca, J. A. (2012). Analysis of interaction fit between manufacturing strategy and technology management and its impact on performance. International Journal of Operations & Production Management, 32(8), 958-981.

Salim , R., Mapulanga, M., Saladi, P., & Karltun, A. (2016). Automation in the wood products industry: challenges and opportunities. Swedish Production Symposium. Lund.

Salim, R. (2018). Drivers and challenges for automation of manufacturing: A multiple case study in the Swedish wood products industry. European Operations Management Association. Trondheim .

Salim, R., Säfsten , K., & Winroth , M. (2015). Current situation analysis: Manufacturing challenges in the wood products industry . International Conference of Production research . Manila.

Sandberg, D., Vasiri, M., Trischler, J., & Öhman, M. (2014). The role of the wood mechanical industry in the Swedish forest industry cluster. Scandinavian Journal of Forest Research, 29, 352-359.

Sheridan, T. B. (2002). Humans and automation: System design and research issues. John Wiley & Sons, Inc.

Sowlati, T., & Vahid, S. (2006). Malmquist productivity index of the manufacturing sector in Canada from 1994 to 2002, with a focus on the wood manufacturing sector. Scandinavian Journal of Forest Research(21), 424-433.

Surowiecki, J. (2004). The wisdom of crowds. Anchor: Doubleday.

Welch, I. (1992). Sequantial sales, learning and casacades. Journal of Finance, 695-732.

Welford, A. T. (1976). Skilled Performance. Scott, Foresman, Glenview, IL.

Wiedenbeck, J., & Parsons, J. (2010). Digital Technology Use by Companiesin the Furniture, Cabinet, Architectural Millwork, and Related Industries. Forest Products Journal, 78-85.

Winroth, M., Säfsten, K., & Stahre, J. (2007). Automation strategies: Existing theories or ad hoc decisions? International Journal of Manufactruing Technology and Management, 11(1), 98-114.


Refbacks

  • There are currently no refbacks.