A Visual Assessment of Cross-laminated Timber Structures in Austria

Authors

  • Henry Quesada-Pineda
  • Robert Smith
  • Guenter Berger
  • Joseph Loferski

Keywords:

cross-laminated timber, building inspection, wood construction

Abstract

Cross-laminated timber (CLT) construction systems have been used commercially for over 20 years, mainly in Western Europe and North America. However, there has not been a report on the current status of CLT buildings. Deterioration of wooden buildings could result from a variety of causes and the life of the structures could be extended if periodic inspections were conducted. This research introduces a visual inspection methodology for assessing deterioration of CLT structures. The inspection methodology was tested in six CLT buildings in Austria. The methodology was proven to be effective in determining the current internal and external condition of the examined CLT structures. The oldest CLT structure inspected dates from 2004. The newest structure inspected was still under construction. The results of the application of the visual inspecting tool show that there was very little damage to the CLT structures. The main causes of damage came from exposure to water on the exterior of the buildings and poor control of humidity and temperature in indoor conditions. Architects who designed the inspected buildings were interviewed to cross validate the results of the visual inspection methodology. In addition, the interviews provided important insights related to the design, construction, and current conditions of the buildings. Furthermore, the architects also provided information regarding the main barriers and drivers that affect CLT construction in Austria.

References

• Bouldin, J.C. 2011. “Methodology for the Visual Inspection of Selected Engineered Wood Products and Connector Hardware for Prescriptive Non-Compliance at the Pre-Drywall Stage of Residential Construction”. Doctoral Dissertation. Department of Sustainable Biomaterials. Blacksburg, VA. Virginia Tech.

• Brandner, R. 2013. “Production and Technology of Cross Laminated Timber (CLT): A State Of-The-Art Report. European Conference on Cross Laminated Timber (CLT)”. Graz, Austria.

• Bouldin J. Loferski, J., and Hindman, D. 2014. “Inspection of Metal Plate–Connected Wood Trusses in Residential Construction”. Practice Periodical on Structural Design and Construction. 19(2), 04014009.

• Bouldin, J. Loferski, J., and Hindman, D. 2013. “Inspection of Wood I-Joists in Residential Construction”. Practice Periodical on Structural Design and Construction. American Society of Civil Engineers, Nov. Vol. 19 (4), pp7.

• Delgado, A., de Brito, J., and Silvestres, D. 2013. “Inspection and Diagnosis Systems for Wood Flooring”. Journal of Performance of Constructed Facilities, 27(5), 564-574.

• Ebner, G. 2017. “CLT production is expected to double until 2020”. Timber-Online.net. Available at https://www.timber-online.net/holzprodukte/2017/06/brettsperrholz-produktion-in-europa---20162020.html. Last access March 13, 2020.

• Espinoza, O., Rodriguez Trujillo, V. Laguarda Mallo, M.F., and Buehlmann, U. 2016. “Cross-Laminated Timber: Status and Research Needs in Europe”. BioResources, 11(1), 281-295.

• Kotradyova, V., Vavrinsky, E., Kalinakova, B., Petro, D., Jansakova, K., Boles, M., & Svobodova, H. 2019. “Wood and Its Impact on Humans and Environment Quality in Health Care Facilities”. International journal of environmental research and public health, 16(18), 3496.

• Muszyński, L. 2015. “The CLT talk. Small Log Conference”. Forest Business Network. Coeur d'Alene, Idaho, United States.

• Levi, M. 1975. “A Guide to the Inspection of Existing Homes for Wood-inhabiting Fungi and Insects”. USDA Forest Service and the Department of Housing and Urban Development.

• Loferski, J., and Espinoza, O. 2014. “Durability of CLT Buildings”. Graduate Seminar presentation. Department of Sustainable Biomaterials. Virginia Tech. Blacksburg, VA.

• Loferski, J., Bouldin, J. Hindman, D. 2013. “Development of a Methodology for the Visual Inspection of Engineered Wood Products and Metal Hangers in Residential Construction”. Advanced Materials Research, Vol. 778. Published by Trans Tech Publications. Available accessed March 2, 2019. http://www.scientific.net/AMR.778.342

• Loferski, J.R. 1997 “Long-Term Performance and Durability of Engineered Wood Products”. Engineered Wood Products: A Guide for Specifiers, Designers and Users. Chapter 8. PFS Research Foundation Inc. Tucson, AZ. pp 275.

• Russell, G., Wells, J., and Wacker, J. 2006. “Assessment and Maintenance of a 15-year-old Stress-laminated Timber Bridge”. USDA Forest Products Laboratory. Report RE-012-1.

• Saporiti, J., Pereira, F., and Quilho, T. 2019. “Assessment of Old Timber Members: Importance of Wood Species Identification and Direct Tensile Test Information”. Construction and Building Materials, 207, 651-660.

• USDA Forest Service. 1973. “Principles for Protecting Wood Buildings from Decay”.

• Viluma, A., and Bratuskins, U. 2016. “Barriers for Use of Wood in Architecture: The Latvian Case”. Architecture and Urban Planning, 13, 43-48.

• White, R. and Ross, R. 2014. “Wood and Timber Condition Assessment Manual”. USDA Forest Products Laboratory. 2nd edition.

Downloads

Published

2020-07-17

Issue

Section

Empirical Manuscripts