• Kendall Jane Conroy Oregon State University
  • Mariapaola Riggio Oregon State University
  • Chris Knowles Oregon State University


architect perceptions, sustainability, wood construction industry


The construction sector has a larger greenhouse gas reduction potential than other sectors. Selection of more sustainable materials can plan an important role alleviating greenhouse gas emissions. Humans spend 92% of their time indoors, inciting a need to ensure healthy indoor environments. Wood is a material that has many positive attributes in comparison to non-renewable construction materials such as steel and concrete, including: renewability, a smaller carbon footprint and human health benefits. Because architects are one of the key decision makers for building material selection, their perceptions of the sustainability of wood products was investigated. American Institute of Architects certified architects on the United States West Coast, a prominent area for the forest product industry and green building, were contacted to complete a questionnaire.  The responding architects indicated that they have an overall positive perception of the environmental and health impacts of using wood products in the built environment, with some concerns about the impacts building with wood can have on forests. It appears that the environmental and health impacts building materials have is important to the responding architects, but these attributes are not as important when making material decisions for a building compared to aesthetics, codes, and cost.

Author Biographies

Kendall Jane Conroy, Oregon State University

Masters Student

Department of Wood Science and Engineering

Mariapaola Riggio, Oregon State University

Assistant Professor of Wood Design and Architecture

Department of Wood Science and Engineering

Chris Knowles, Oregon State University

Associate Professor of Forest Products Marketing

Department of Wood Science and Engineering


Attallah, S., Kandil, A., Senouci, A., & Al-Derham, H. (2017). Multicriteria Decision-Making Methodology for Credit Selection in Building Sustainability Rating Systems. Journal of Architectural Engineering, 23(2), 04017004.

Bayne, K., & Taylor, S. (2006). Attitudes to the use of Wood as a Structural Material in Non-residential Building Applications: Opportunities for Growth. Forest and Wood Products Research and Development Corporation, Victoria, Australia.

Buchanan, A., & Levine, S. (1999). Wood-based building materials and atmospheric carbon emissions. Environmental Science & Policy, 2(6), 427-437.

Burnard, M., & Kutnar, A. (2015). Wood and human stress in the built indoor environment: a review. Wood science and technology, 49(5), 969-986.

Bysheim, K., Nyrud, A., Strobel, K. (2016). Building materials and well-being in indoor inviornments. Treteknisk. 88

Cohen, J. (1988). Statistical power analysis for the behavioral sciences. Hillsdale, NJ: Erlbaum.

Cole, R. J., & Kernan, P. C. (1996). Life-cycle energy use in office buildings. Building and environment, 31(4), 307-317.

Cuadrado, J., Zubizarreta, M., Pelaz, B., & Marcos, I. (2015). Methodology to assess the environmental sustainability of timber structures. Construction and Building Materials, 86, 149-158.

Dillman, D., Smyth, J., & Christian, L. (2014). Internet, phone, mail, and mixed-mode surveys: the tailored design method. John Wiley & Sons.

Environmental Protection Agency (EPA). (2017, June 21). Glossary of sustainable manufacturing terms. Retrieved from

Fell, D. R. (2010). Wood in the human environment: restorative properties of wood in the built indoor environment (Doctoral dissertation, University of British Columbia).

Forest Products Lab, (2010). Wood Handbook: Wood as an Engineering Material. U.S. Department of Agriculture. Forest Service, Madison, Wisconsin.

Gaston, C. (2014). Visual Wood Product Trends in North American Nonresidential Buildings. Forest Products Journal, p. 107-115.

Gaston, C., Kozak, R., O’Connor, J., & Fell, D. (2001). Potential for increased wood-use in North American non-residential markets. Forintek Canada Corp.

Gerilla, G. P., Teknomo, K., & Hokao, K. (2007). An environmental assessment of wood and steel reinforced concrete housing construction. Building and Environment, 42(7), 2778-2784.

Gustavsson, L., Pingoud, K., & Sathre, R. (2006). Carbon dioxide balance of wood substitution: comparing concrete-and wood-framed buildings. Mitigation and adaptation strategies for global change, 11(3), 667-691.

Hammon, S. (2016). Tall Wood Survey: Identifying and Analyzing the Obstacles of Perception. Perkins & Will Research Journal. 8(1):25-47.

Hammond, G., & Jones, C. (2008). Embodied energy and carbon in construction materials. Proceedings of the Institution of Civil Engineers-Energy, 161(2), 87-98.

Hemström, K., Mahapatra, K., and Gustavsson, L. (2010). The perceptions of Swedish architects and structural engineers towards use of wood frames in multi-story buildings. PHD Candidate. Mid Sweden University, Sweden.

IBM corp. (2016). IBM SPSS Statistics for Windows, Version 24.0. Armonk, NY: IBM Corp.

International Organization for Standardization. (2006). Environmental Management–Life Cycle Assessment–Principles and Framework (ISO 14040). Retrieved from

International Organization for Standardization. (2006). Environmental labels and declarations—Type III environmental declarations—Principles and procedures (ISO 14025). Retrieved from

John, S., Nebel, B., Perez, N., & Buchanan, A. (2009). Environmental impacts of multi-storey buildings using different construction materials.

Kellert, S. (2004). Beyond LEED: from low environmental impact to restorative environmental design. Green Roof Infrastructure Monitor, 6(1).

Knowles, C., Theodoropoulos, C., Griffin, C., and Allen, J. (2011). Oregon design professionals’ views on structural building products in green buildings: implications for wood. Canadian Journal of Forest Research. 41(2):390-400.

Kotradyová, V., Tiňo, R., Šprdlík, V., & Kaliňáková, B. (2015). Potential of Natural solid wood surfaces in the built-environment of health care and therapeutic facilities. InWood2015: Innovations in Wood Materials and Processes, 19.

Kozak, R.A. and Cohen, D.H. (1999). Architects and structural engineers: An examination of wood design and use in nonresidential construction. Forest Products Journal. 49(4):37.

Laguarda Mallo, M. F. L., and Espinoza, O. (2015). Awareness, perceptions and willingness to adopt cross-laminated timber by the architecture community in the United States. Journal of Cleaner Production. 94:198-210.

Lähtinen, K., Toppinen, A., Suojanen, H., Stern, T., Ranacher, L., Burnard, M., & Kuzman, M. (2017). Forest Sector Sustainability Communication in Europe: a Systematic Literature Review on the Contents and Gaps. Current forestry reports, 3(3), 173-187.

Larasatie, P., Guerrero, J., Conroy, K., Hall, T., Hansen, E., & Needham, M. (2018). What Does the Public Believe about Tall Wood Buildings? An Exploratory Study in the US Pacific Northwest. In Press.

Lehmann, S. (2012). Sustainable construction for urban infill development using engineered massive wood panel systems. Sustainability, 4(10), 2707-2742.

Lippke, B., Wilson, J., Meil, J., & Taylor, A. (2010). Characterizing the importance of carbon stored in wood products. Wood and Fiber Science, 42, 5-14.

Markström, E., Kitek Kuzman, M., Bystedt, A., Sandberg, D., Fredriksson, M. (2018). Swedish architects view of engineered wood products in buildings. Journal of Cleaner Production. 181:33-41.

Mayo, J. (2015). Solid wood: Case Studies in Mass Timber Architecture, Technology and Design. Routledge.

Microsoft, (2013). Microsoft Office Excel. Retrieved 2014 from:

Nyrud, A., & Bringslimark, T. (2010). Is interior wood use psychologically beneficial? A review of psychological responses toward wood. Wood and Fiber Science, 42(2), 202-218.

Nyrud, A., Bysheim, K., & Bringslimark, T. (2010). Health benefits from wood interior in a hospital room. In Proceedings of the International Convention of Society of Wood Science and Technology and United Nations Economic Commission for Europe, Geneva, Switzerland (Vol. 1114).

O'Connor, J., Kozak, R., Gaston, C., & Fell, D. (2003). Wood Opportunities in Non-Residential Buildings: A Roadmap for the Wood Products Industry (Special Publication No. SP-46). UBC and Forintek Canada Corp., Vancouver, Canada.

O’Connor, J. (2004). Survey on actual service lives for North American buildings. In Woodframe housing durability and disaster issues conference, Las Vegas (pp. 1-9).

O'Connor, J., Kozak, R., Gaston, C., and Fell, D. (2004). Wood use in nonresidential buildings: Opportunities and barriers. Forest Products Journal. 54(3):19.

Ott, W. (1988). Human activity patterns: a review of the literature for estimating time spent indoors, outdoors, and in transit. US Environmental Protection Agency.

Perez-Garcia, J., Lippke, B., Briggs, D., Wilson, J.B, Boyer, J., Meil, J. (2005). The Environmental Performance of Renewable Building Materials in the Context of Residential Construction. Wood and Fiber Science 37(Special Issue): 3-17.

Petersen, A. K., & Solberg, B. (2002). Greenhouse gas emissions, life-cycle inventory and cost-efficiency of using laminated wood instead of steel construction. Environmental Science & Policy, 5(2), 169-182.

Rice, J., Kozak, R., Meitner, M., Cohen, D. (2006). Appearance wood products and psychological well-being. Wood and Fiber Science. 38(4): 644-659.

Roberts, L. (2011) 9 billion? Science, 333, 540–543.

Robertson, A., Lam, F., & Cole, R. (2012). A comparative cradle-to-gate life cycle assessment of mid-rise office building construction alternatives: laminated timber or reinforced concrete. Buildings, 2(3), 245-270.

Robichaud, F., Kozak, R., & Richelieu, A. (2009). Wood use in nonresidential construction: A case for communication with architects. Forest Products Journal, 59(1/2), 57.

Roffael, E. (2006). Volatile organic compounds and formaldehyde in nature, wood and wood based panels. Holz als Roh-und Werkstoff, 64(2), 144-149.

Roos, A., Woxblom, L. & McCluskey, D. (2010). The influence of architects and structural engineers on timber in construction – perceptions and roles. Silva Fennica 44(5): 871–884.

Roth, T. (2015). Educational Needs Assessment of Designers in West Coast States: Architects. Oregon State University, United States. (M.S. Thesis)

Salazar, J., & Meil, J. (2009). Prospects for carbon-neutral housing: the influence of greater wood use on the carbon footprint of a single-family residence. Journal of Cleaner Production, 17(17), 1563-1571.

Shaw, C., Magee, R., Swinton, M., Riley, M., & Robar, J. (2002). Canadian experience in healthy housing. National Research Council Canada, Institute for Research in Construction.

Sinha, A., Gupta, R., & Kutnar, A. (2013). Sustainable Development and Green Buildings. Wood Industry/Drvna Industrija, 64(1).

Softwood Lumber Council. (2018, May 8). Retrieved from

Spelter, H., & Anderson, R. (1985). A Profile of Wood Use in Nonresidential Building Construction (No. FSRB-FPL-15). Forest Products Lab. Madison, WI.

Spetic, W., Kozak, R., & Cohen, D. (2005). Willingness to pay and preferences for healthy home attributes in Canada. Forest Products Journal, 55(10), 19.

Ürge-Vorsatz, D., Danny Harvey, L., Mirasgedis, S., & Levine, M. (2007). Mitigating CO2 emissions from energy use in the world's buildings. Building Research & Information, 35(4), 379-398.

USDA. (2011). National Report on Sustainable Forests--2010. FS-979. Washington D.C.: USDA Forest Service. 212.

USGBC. (2010). Green building and LEED core concepts. USGBC United States Green Building Council (USGBC), Washington, DC

Vaske, J. J. (2008). Survey research and analysis: Applications in parks, recreation and human dimensions. Venture Publ.

Wade, C., & Tavris, C., (2000). Psychology 6th ed. Prentice Hall. Upper Saddle River, NJ. p. 654

Wang, L., Toppinen, A., & Juslin, H. (2013). Use of wood in green building: a study of expert perspectives from the UK Journal of cleaner production, 65, 350-361.






Empirical Manuscripts